Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Electric Hoists

Tractel's Electric Hoists — TIRAK

Industrial Agency

U.L. Classified / CSA Approved Traction Hoists

As a user of suspended scaffolding equipment, you want a powered hoist you can depend on; one that's easy to handle, has the capacity you need, and is inexpensive to maintain. Tirak X-Series and T-Series traction hoists have all the features you need and more. These hoists use a unique traction system with a wire rope that passes completely through the machine, rather than it being stored in the machine itself. For this reason, this same hoist can be used for any job from 30 to 1,200 feet and even higher. In fact, Tirak hoists are designed for use on all types of suspended scaffolding equipment, including swing stages, work cages, and bosun's chairs. You can choose from electric motors (110, 220, or dual voltage) or air powered motors. Lifting capacities range from 700 to 1,500 pounds.

For emergency situations, a Blocstop BSO 500 secondary brake is mounted on Tirak hoists as standard equipment. The BSO 500 is mounted externally for easy service and inspection. A centrifugal, mechanical brake allows for controlled descent even if power is lost. This means there is no dependence on electrical components for emergency lowering. The Blocstop BS/BSO 500 is a combination brake for a dual wire rope system that provides protection in case of a primary rope failure.


Tirak X-Series

XE301P

Rated load (lbs): 700
Lifting Speed (fpm): 33
Weight (lbs)*: 77
Type KW: 0.55
Voltage: 110
Phase: Single
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

XE301P

Rated load (lbs): 700
Lifting Speed (fpm): 33
Weight (lbs)*: 77
Type KW: 0.55
Voltage: 220
Phase: Single
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

XE500P

Rated load (lbs): 1000
Lifting Speed (fpm): 35
Weight (lbs)*: 93
Type KW: 1.1
Voltage: 220
Phase: Three
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

XE501P

Rated load (lbs): 1000
Lifting Speed (fpm): 35
Weight (lbs)*: 121
Type KW: 1.1
Voltage: 110/220
Phase: Single
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)


XE501PA

Rated load (lbs): 1000
Lifting Speed (fpm): 35
Weight (lbs)*: 109
Type KW: 1.1
Voltage: 220
Phase: Single
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

XE700P

Rated load (lbs): 1500
Lifting Speed (fpm): 10-25
Weight (lbs)*: 93
Type KW: 1.5
Voltage: 220
Phase: Three
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

XE700PA

Rated load (lbs): 1500
Lifting Speed (fpm): 35
Weight (lbs)*: 126
Type KW: 1.5
Voltage: 220
Phase: Single
Wire rope dia.: 5/16" (8.3mm)
Breaking Strength: 10,000 lbs. (66.8 kN)

* Includes BSO secondary brake


Tirak T-Series

TE1000P

Rated load (lbs): 1500
Lifting Speed (fpm): 35
Weight (lbs)*: 174
Type KW: 2.2
Voltage: 200
Amperage: 9.4
Phase: Three
Wire rope dia.: 3/8" (9mm)
Breaking Strength: 15,000 lbs. (66.8 kN)

TE1001P

Rated load (lbs): 1500
Lifting Speed (fpm): 17
Weight (lbs)*: 194
Type KW: 1.1
Voltage: 100/200
Amperage: 18/9
Phase: Single
Wire rope dia.: 3/8" (9mm)
Breaking Strength: 15,000 lbs. (66.8 kN)

TE1020P

Rated load (lbs): 2000
Lifting Speed (fpm): 35
Weight (lbs)*: 174
Type KW: 2.2
Voltage: 220
Amperage: 9.4
Phase: Three
Wire rope dia.: 3/8" (9mm)
Breaking Strength: 15,000 lbs. (66.8 kN)

TE1021P

Rated load (lbs): 2000
Lifting Speed (fpm): 17
Weight (lbs)*: 194
Type KW: 1.1
Voltage: 100/200
Amperage: 18/9
Phase: Single
Wire rope dia.: 3/8" (9mm)
Breaking Strength: 15,000 lbs. (66.8 kN)


Product Categories